{"product_id":"wisefab-bmw-e46-m3-series-lock-kit-wf046m","title":"Wisefab - BMW E46 M3 Series Lock Kit (WF046M)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOver 60 degrees of usable lock for BMW E46 M3. While providing over 60 degrees of lock, this kit is engineered and tested to optimize also a lot of other parameters that make the difference in handling and performance. Very easy to install. Set your desired toe in and enjoy. All the parts on the lock kit are provided as spare parts.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWant to know how does Wisefab Lock kit fits your driftcar check below the link \u003cstrong data-mce-fragment=\"1\"\u003eCHECK FITMENT \u003c\/strong\u003eor \u003ca href=\"https:\/\/www.wisefab.com\/fitment-calculator\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.wisefab.com\/fitment-calculator\" target=\"_blank\"\u003ehere!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor the rear we have an upper link and a lower link these will allow to set up your car for better traction(Upper arm will replace the spring carrier arm). We also offer you the trailarm bushings.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScroll down to order your spare parts conviently right here!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eHere is our recommended alignment parameters:\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eToe in\/out: 0\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCamber: -4\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCaster: 5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eHigher roll center\u003cbr\u003e\u003c\/span\u003eWisefab suspension kit brings the front roll center up on lowered cars, providing higher roll stiffness and letting to remove the front anti roll bar (swaybar) enabling maximum usable lock.\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eRevised steering geometry (Ackermann)\u003cbr\u003e\u003c\/span\u003eNormally in a corner the inner wheel has a greater angle than the outer. For drifting this means loss of speed and grip and we have correted this for best performance.\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eGood camber control with high steering angles\u003cbr\u003e\u003c\/span\u003eWith high steering angles the leading wheel will have a positive camber, which is not a positive effect. It reduces the front grip and during turn or flip it creates a contact patch transition from inside edge to outside edge. It is not possible to eliminate it, but with our geometry it has decreased as much as possible.\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSteering jacking control\u003cbr\u003e\u003c\/span\u003eDuring drifting, when steering angle is much bigger, jacking is also bigger, even with the same geometry and it could become a problem. We have monitored it and changed the geometry that it doesn’t cause any handling issues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePredictable self-alignment control\u003cbr\u003e\u003c\/span\u003eWith certain suspension geometry at high steering angles it could happen that the steering wheel is locking up at the end and driver needs to apply some force to flip it to other side. We know what causes it and have decreased it to minimum, if not eliminated it.\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable coilover upper mounts, Formula Drift compliance.\u003c\/li\u003e\n\u003cli\u003eHub add-ons with hardware.\u003c\/li\u003e\n\u003cli\u003eLightweight lower control arms.\u003c\/li\u003e\n\u003cli\u003eAssembeled tie rods.\u003c\/li\u003e\n\u003cli\u003eAdjustable lower control arm rear mount.\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eOther components, packaging and clearance.\u003c\/span\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit assumes coilovers to have enough clearance. \u003c\/li\u003e\n\u003cli\u003eWe recommend tire diameter not bigger than 620mm (235\/40 R17). \u003c\/li\u003e\n\u003cli\u003eWider fenders or fender flares needed with this kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WiseFab","offers":[{"title":"Default Title","offer_id":43932023554235,"sku":"WiseFab-WF046M","price":1640.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/9556\/2683\/products\/image_d27431dc-a7d7-4704-a4d7-72afe1075421.jpg?v=1668965826","url":"https:\/\/drifthq.com\/products\/wisefab-bmw-e46-m3-series-lock-kit-wf046m","provider":"Drift HQ","version":"1.0","type":"link"}