{"product_id":"weld-it-yourself-e30-roll-bar","title":"Garagistic - E30 DIY Weld-it-Yourself Roll Bar - Coupe \u0026 Sedan","description":"\u003ch1\u003eE30 DIY Weld-It-Yourself Roll Bar (Coupe \u0026amp; Sedan)\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Garagistic bolt-in roll bar for the E30 chassis is built with the dual-purpose driving enthusiast in mind! This was released after customers wanted an affordable way to get our famous roll bars! Well, this is the weld-it-yourself (DIY) kit. We did most of the hard work for you! All roll bar pieces are pre-notched and ready to weld. Additionally, we provide you with all of the tubes needed to make any of the variations of this roll bar you need - straight and bent harness bars, straight or bent rear legs, and diagonal X bracing are all included in this comprehensive DIY kit. Because these come in pieces, shipping is considerably cheaper than our fully assembled roll bars.\u003c\/p\u003e\n\u003cp\u003eOur roll bar tubing is made from high-strength 1.75\" dia x .120 wall DOM tubing with 1\/8\" thick mounting plates for optimal strength and durability. It features a nice snug fit while still retaining the use of factory front seat belts.\u003c\/p\u003e\n\u003cp\u003eOur roll bar's feet of the main hoop mount to the outer thicker area of the floorboard instead of the thin footwell. This helps to ensure a strong mounting point and prevent tear-through if the worst should happen. We also include outer reinforcement plates that help to further reinforce the mounting points by squeezing from both inside and out of the cabin.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1.75 dia x .120 wall DOM Tubing Fit\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady To Assemble:\u003c\/strong\u003e Pre-Cut and Notched Tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Weld to Fit Your E30 as Tight and Perfectly as Possible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Comes with ALL Tubing Needed to Make ANY Combination of Bracing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY:\u003c\/strong\u003e Ideal for DIY Enthusiasts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eIncluded\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch4\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMain Hoop Bar\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe main hoop is left longer at the bottom to allow adjustment depending on how close you want to get the hoop to the roofline\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e2 Harness Bar Options\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStraight Harness Bar x1\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBent Harness Bar x1\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThis bar is for taller drivers. If the back of your seat is behind the B pillar (in a sedan) you will need to use this bar. We recommend checking your seating position before fully welding the harness bar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStraight Passenger Harness Bar x1\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFront Diagonal Bar x2 pcs\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eRear Roll Bar Leg Options\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear X Bracing Bars x3 pcs\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eConsisting of three bars to add the iconic X to the rear, these are optional to add extra rigidity to the chassis. Those who prefer to save a little weight can choose to not add the X. This will only work with straight rear legs. Cutting down the X bars and modifying the lower coping can be done to fit on bent rear legs. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Rear Legs x2 pcs\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe rear legs are left longer to allow for adjustability on the overall fit, it is recommended to cut them a little shorter if you want your cage to be removable in the future or leave them longer if the cage is going to be installed permanently\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBent Rear Legs x2 pcs\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThese legs curve at the bottom to allow for a modified rear seat cushion to be installed\u003c\/li\u003e\n\u003cli\u003eThe rear legs are left longer to allow for adjustability on the overall fit, it is recommended to cut them a little shorter if you want your cage to be removable in the future or leave them longer if the cage is going to be installed permanently\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eRoll Bar Landing Feet\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat Front Roll Bar Feet x2 pairs\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e1 pair for the inside (top)\u003c\/li\u003e\n\u003cli\u003e1 pair for the outside (bottom) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBent Rear Roll Bar Feet x2 pairs\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 pair for the inside (top)\u003c\/li\u003e\n\u003cli\u003e1 pair for the outside (bottom)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM10 bolts, nuts, and nylon locking nuts - QTY 12\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended to install with locking nuts on top to prevent damage to the bolt threads in the event that your car comes into contact with road debris\u003c\/li\u003e\n\u003cli\u003eThe roll bar can also be welded directly into the chassis if so desired\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstallation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThese roll bar kits require welding. These do not come pre-welded. This is the DIY kit. Welding is recommended to be done by a professional who is certified to be able to weld safety equipment. Garagistic is not liable for \"fabricators\" who pick up a harbor freight welder and attempt this as their first welding project. Please practice caution and common sense in the assembly of this roll bar.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0283\/8868\/7971\/files\/roll_bar_2.webp?v=1739392229\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePlease note: \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThe main hoop and rear legs are purposfully longer\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eWe do this so that you can cut them down to your liking. If you want the main hoop really close to the roof (or you have a non-sunroof e30), you might want to leave them a little longer. If you want the ability to remove the roll bar in the future easier, you would also have that ability since you cut the legs to your liking. Once you cut the main hoop, you can then do the same for the rear legs to adjust angle, position and landing areas.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eRelease of Liability\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e In no event shall Garagistic be liable for any direct, indirect, punitive, incidental, special, or consequential damages to property or life, whatsoever arising out of or connected with the use or misuse of this product. Under no circumstance do we imply that this product improves the safety of your car or prevents injury from occurring during an automotive incident. This product is strictly for off-road use and is simply the precursor material for producing a harness bar, roll bar, or aesthetic modification. It is not intended for use in any motorized vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePlease Note: \u003c\/strong\u003ePhotos in the listing may differ from the actual configuration\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eBelow is one of the configurations and how the pieces come together: Bent rear legs + Straight harness bar\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oHMq4QYaCJQ\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Garagistic","offers":[{"title":"Default Title","offer_id":47483820966075,"sku":"K5004-DIY","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/9556\/2683\/files\/K5004-DIYE30-DIY-Weld-it-Yourself-Roll-Bar-Coupe-Sedan-Roll-Bars-Garagistic-bmw-e30-e36-e46-e92-grip-race-drift.png?v=1772037405","url":"https:\/\/drifthq.com\/pt\/products\/weld-it-yourself-e30-roll-bar","provider":"Drift HQ","version":"1.0","type":"link"}