{"product_id":"zamp-fia-z-20-antifog-series-shield-amber","title":"Zamp FIA Z-20 AntiFog Series Shield Amber","description":"\u003ch5\u003eZ-20 Shield Replacement:\u003c\/h5\u003e\n\u003cp\u003e\u003csmall\u003eNOTE: \u003cu\u003eDO NOT USE\u003c\/u\u003e power tools or overtighten screws when changing shields.\u003cbr\u003eStep 1 - Lay a towel on a flat surface and set the helmet on it.\u003cbr\u003eStep 2 - Remove the shield pivot tensioners on each side. (This is the smaller screw on the sides of the shield.)\u003cbr\u003eStep 3 - Remove the shield pivot screws on each side. (This is the larger screw on the sides of the shield. For best results, we suggest using a quarter to loosen\/tighten these screws.)\u003cbr\u003eStep 4 - Remove the shield. We suggest using a soft cloth towel to wipe down the rubber seal as well as where the shield mounts to the helmet for best results.\u003cbr\u003eStep 5 - Place the new shield on the helmet. There are two white washers that go between the shield and helmet, make sure these are in place before re-installing the shield pivot screws.\u003cbr\u003eStep 6 - Hand thread the shield pivot screws to hold the shield in place. Once hand threaded, use a quarter to tighten until snug with the helmet shell. Do not overtighten.\u003cbr\u003eStep 7 - Hand thread the shield pivot tensioners, then tighten to desired tension for shield movement.\u003c\/small\u003e\u003c\/p\u003e","brand":"Zamp","offers":[{"title":"Default Title","offer_id":47274736287931,"sku":"Zamp-HASZF20AMAF","price":50.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/9556\/2683\/files\/image_f8c42716-5edd-44c3-bf5d-2cb6afbab67c.png?v=1766059159","url":"https:\/\/drifthq.com\/pt\/products\/zamp-fia-z-20-antifog-series-shield-amber","provider":"Drift HQ","version":"1.0","type":"link"}