Auto Rod Controls - Overhead Pro Stock Control Module (3700)

Pro Stock Controls Overhead and Dash units have the same functions

1) Starter Switch

Recessed to prevent accidental striking, It is mounted nearest the driver and next to the ignition switch for ease  of operation.

2) Ignition Switch

This switch interlocks to the fuel pump controls shutting  the pumps off when ignition is killed. The switch is lighted red when on to aid in night racing.

3) Fuel pump switches

Off in the center position, on - in the up position. They are safety interlocked with the ignition switch. The down position is a spring return marked "test" which bypasses the ignition interlock for the purposes of filling the carburetors, setting pressure regulators and float levels or individually checking pump outputs. Dual switching also allows the use of only one pump in the non race running conditions saving the batteries. The 2nd switch can also be used for any other function.

4) Cooling Switch

Designed to operate an electric water pump in the "low cool" position and both an electric water pump and electric radiator fan in the high position.

5) Lamps

To allow the gauges and/or headlights to be lighted only when needed extending the bulb life. Units have a three position lamp switch: off - down, Middle gauges only and up for gauges and headlights

Both in dash and overhead units hinge out for easy access to fuses. It also contains two spare fuses