GKTech - BUDGET HYDRAULIC E-BRAKE ASSEMBLY AND IN-LINE BRAIDED LINE KIT

The GKTECH budget hydraulic e-brake kits are designed as a cheap alternative to our complete stand alone hydraulic e-brake setup which requires additional calipers, pads and brackets to run the extra calipers. The in-line kit runs through your existing rear calipers and with the inclusion of the braided lines in this kit, is a direct fit with no modifications required.

The reason we call this a "budget" kit is that we are using a generic e-brake handle, assembly and master cylinder as opposed to our pro kit which is a stand alone uses our proprietary assembly, an expensive CNC machined aluminium/carbon fibre handle, Wilwood master cylinder and with all the required parts costs a minimum of $500-$700 to set up.

The stainless steel braided lines included are assembled by us in-house in Australia using quality UK made fittings and braided stainless steel, teflon lined lines.

We developed these kits after many customers request for an in-line kit. Our kit is cheap, super easy to install and is reversible with no permanent modifications.

Simply remove the standard line between the master cylinder and the rear main line and connect the new braided lines up to the E-brake master cylinder and back again. Total install time should be around 30 minutes.

- For race cars only however no permanent modifications are required.

NOTE #1: Can NOT be installed on cars with ABS still fitted however can be used in conjunction with our ABS delete kit