PMC Motorsport - Aluminium adjustable rear lower control arms BMW E36 E46 - Uniball (WRAE36-U)

Its says its for E36 and E46, however upon fitment I had to modify parts to get them to fit. I contacted PMC to see if there was an error on their end. They notified me they've never had a fitment issues and it would be best to contact Drift HQ. With that being said, it is easy to get the part to fit correctly with some trimming of the billet inserts for the rod end. Trailing arm fitment was very nice, nice snug and tight fitment that isnt lose but also doesn't require excessive force to slide trailing arm bushings into the PMC arm. Well Done PMC, as for subframe fitment. I believe this kit was designed for E36 subframe but is interchangeable, after measuring and test fitment. I believe Drift HQ supplies them as E36 camber arms, the billet inserts supplied for the subframe are roughly 1/2" too wide. E46 subframe ID space for camber arm measure out to 2 1/4", with the arm from Drift HQ and the inserts installed measured out to 2 3/4". One insert is visibly longer than the other, so I had to remove the insert and cut off and grind down 1/2" of the insert to get the right width to install into the subframe. For those that buy this for E46, you will have to modify the billet inserts.