Destroy or Die - Mazda MX5 Miata NC / RX8 Adjustable Front Lower Control Arms and Front Super Knuckles

FLCA Features:

• Fit all NC & RX8 models - (FLCA & Knuckles must be fitted together).
• Additional camber adjustment separate from factory adjustment allows optimum caster and camber settings.
• Massive wheel clearance compared to stock arms for increased steering angle.
• Widens track by at least 25mm per side - up to 100mm overall added track width at full extension.
• No trimming of chassis or bodywork is required at minimum track width (some arch rolling may be required with lower offset wheels).
• Use OEM fit bushes - Add Powerflex bushes (1x PFF36-400 and 1x PFF36-401)
• Use NA NB front lower ball joints - sold separately.

FSK Features:

• Fit all NC & RX8 models - (FLCA & Knuckles must be fitted together).
• Drift and Track settings are incorporated into the knuckle giving 2 options which are easily swapped between at the user's convenience.
  
• 40mm of roll centre correction eliminates bump steer giving superb control and steering input.
• Drift Setting - Massive steering angle combined with the 40mm roll centre correction makes fast, high-angle drifts precise and predictable - even for backwards entries!
• Track Setting - 40mm roll centre correction but retains factory steering geometry for improved grip driving without the increased steering ratio.
• Use OEM wheel bearings.
  
• ABS compatible.

Contents:

• 2x Front Lower Control Arms
• 2x Front Super Knuckles

Warnings:

• Extended tie rods are required when extending the track width for NC - 
• NA NB MX5 lower ball joints are required - Not included in this kit.
  
• Fitting by an experienced mechanic is strongly recommended. Destroy Or Die are not responsible for any damage or injury caused due to incorrect fitting or assembly.
• Not for road use.