AKG Motorsport - BMW Rear Upper Shock Mount Bushings, Poly 95A – E90, E92, E82

These BMW E90, E92, E82 Polyurethane (95A) Rear Upper Shock Mount Bushings are true, racing rear shock mounts that virtually eliminate the deflection that occurs with the factory upper rear shock mount bushings. The stock shock mount bushings deflect under load – negatively affecting the rear shock damping, especially with a modified suspension and increased shock valving. Upgrading your factory shock mount bushings to our BMW E90, E92, E82 polyurethane (95A) rear upper shock mount bushings will virtually eliminate this movement, helping to keep the rear shock in place so that it may operate properly.

These medium-hard 95A durometer polyurethane rear upper shock mount bushings are our race-spec compound bushings for this location (as opposed to our performance-spec 85A compound). They are designed for those who are looking to obtain maximum performance out of their rear shocks for racing use.

Our U.S. Military Spec 95A durometer compound is hard, yet slightly pliable – with elasticity and memory. This exclusive compound allows us to manufacture a bushing with high performance characteristics which is free from the deformation that plastic bushings (Delrin, UHMW) are very prone to.

We recommend pairing these rear upper shock mount bushings with our BMW Spherical Rear Lower Shock Mounts to eliminate movement at the bottom of the shock as well, for the ultimate in performance and reliability.

Made of our exclusive U.S. Military Spec polyurethane (95A hardness) with stainless steel sleeves. Engineered for a perfect fit. Set of two. 

Original AKG design. 

Recommended Use: RACE / TRACK

NVH Increase: Medium

Designed for the following models:

BMW E90 E92 E93 (2006-2013) 325, 328, 330, 335 (NOT M3)
BMW E82 E88 (2008+) 128, 135 (NOT 1M)

Made in USA