Auto Rod Controls - Low Oil Pressure Shutdown with Controlled startup Overide for Flat Touch Controls (8001DP)

8001DP - Black front in dash unit 

This new system allows starting the engine temporarily bypassing the oil pressure 
shutdown feature. When the engine starts it monitors the required low oil pressure. It 
waits and if minimum oil pressure is not reached safely it will shut engine off. If the 
pressure is correct the engine will continue to run through the oil pressure switch 
closure. This overrides the ignition switch on power enabling it to shut the engine off 
with the ignition switch still on. The ignition switch simultaneously also retains the ability to shut the engine off. With this control the oil pressure switch never switches any high currents which assures its longevity while still maintaining a 40 amp capacity ignition circuit.

Our units manual override switch is provided to bypass and/or test the engine oil 
pressure switch. By automatically monitoring the startup oil pressure rise makes it 
unnecessary  to crank the motor excessively with the ignition off in an attempt to obtain enough oil pressure to close the switch and allow the car to start. This procedure only drains the battery, overheats the starter and tends to flood the motor.
The unit works with any two pin normally opened contact oil pressure switch.