BD Diesel Killer Frost Plug Plate - 2003-2018 Dodge Cummins 5.9L/6.7L

The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.

This Part Fits:

Year	Make	Model	Submodel
2003,2005-2010	Dodge	Ram 2500	Laramie
2003-2010	Dodge	Ram 2500	SLT
2006-2007	Dodge	Ram 2500	Sport
2003-2010	Dodge	Ram 2500	ST
2008-2010	Dodge	Ram 2500	SXT
2010	Dodge	Ram 2500	TRX
2006-2007	Dodge	Ram 2500	TRX4
2003-2010	Dodge	Ram 3500	Laramie
2003-2010	Dodge	Ram 3500	SLT
2006-2007	Dodge	Ram 3500	Sport
2003-2010	Dodge	Ram 3500	ST
2008-2009	Dodge	Ram 3500	SXT
2007	Dodge	Ram 3500	TRX4
2013-2018	Ram	2500	Big Horn
2011-2018	Ram	2500	Laramie
2014-2015	Ram	2500	Laramie Limited
2011-2018	Ram	2500	Laramie Longhorn
2016-2018	Ram	2500	Limited
2013-2015	Ram	2500	Lone Star
2012-2016	Ram	2500	Outdoorsman
2011-2018	Ram	2500	SLT
2011-2013	Ram	2500	ST
2013-2018	Ram	2500	Tradesman
2013-2018	Ram	3500	Big Horn
2011-2018	Ram	3500	Laramie
2014-2015	Ram	3500	Laramie Limited
2011-2018	Ram	3500	Laramie Longhorn
2016-2018	Ram	3500	Limited
2013-2015,2017	Ram	3500	Lone Star
2011-2018	Ram	3500	SLT
2011-2013	Ram	3500	ST
2013-2018	Ram	3500	Tradesman