E46 330 DUAL OVAL SHIFTER KIT (03/2003+)

This is our complete E46 dual oval shifter bushing rebuild kit designed specifically for the late model BMW E46 330 and similar chassis with a 6-speed transmission. Pairs great with our Supreme Shifter.

This kit replaces all of the maintenance items in the factor shifter assembly needed to make it feel fresh again. Our Garagistic Delrin or Aluminum front carrier bushings replace the original rubber bushings (which not only had a lot of "give" but are usually neglected and degrade over time). The rear poly bushing will replace the very soft OEM which is a culprit for a mushy shifter feel and is retrofitted into the thin factory metal housing for reinstallation. When replaced together, these bushings eliminate any side-to-side movement of the aluminum shift carrier. These shifter bushings fit at the front and rear of the aluminum carrier and will not increase vibration or harshness while still improving shifter feel. For best results, we recommend replacing the factory selector joint found on the end of the transmission (25117580281) and upgrading the selector rod to a DSSR.

It's a really good idea to change your transmission fluid while you are down there. 

The DSSR for your E46 can be found below:

E46 330i/330ci - 03/2003+

Each kit consists of:

• Garagistic E36/46 Polyurethane Rear Carrier Bushing (fits inside 25111222015)
• Garagistic Oval Shifter Bushings X2 - available in Delrin or Aluminum (25117507695)
• OEM shifter cup (25111469397 or 25111220600)

What BMW models does this kit fit?

• E46 330i/330ci - 03/2003+

*330i/330ci models made before March 2003 will need the standard E46 oval shifter bushing kit which can be found here.

If you are unsure, please check your VIN on realoem.com, check the manufacture date of your car on the sticker in the driver side door jam, or email support@garagistic.com

Note on Front Carrier Shifter Bushing Fitment:

One front carrier bushing might fit differently than the other side. Click here to learn why.