FDF Raceshop - BMW E36/E46 ANGLE KIT TIEROD UPGRADE

We have analyzed the BMW E36/E46 chassis after years of data and designed some much needed high strength, long-lasting parts.

The tie rod upgrade uses only Chromoly and 7075 aluminum to make up its construction.

What does it do?

What it does is gets rid of your OEM socket ball joint inner, and replaces it with a Chromoly adaptor that allows you to use a high strength rod end. These rod ends have an extremely long life, especially when used in an inner tie rod application. The best part is when it does need to be replaced, it is only a $17US part.

Why do you need it?

Why you might need these is because the additional load applied to the inner tie rod vastly exceeds the designed load intended while drifting. This wears the socket out quickly, causing you to need replacements often and affects your alignment over time as they wear out. Our design can be adapted to any angle kit—FDF, Wisefab, SLR—and be used in conjunction to improve the handling and longevity of your angle kit and tie rods.

Option Selection Guide:

• Without outer Heim joint: Choose this option for FDF or SLR kits.
• With outer Heim joints: Choose this option if you are adapting these tie rods to a custom kit, or to Wisefab.

The outer tie rod is a Left hand 5/8-18, and this joint can be adapted to any kit with a different set of spacers. If you have questions, send us an email and we will get right back to you!

Sizing & Lengths:

• E36: Tie rod body 11.5"
• E46: Tie rod body 13.5"
• For "Other": Please email or add in the order notes how long you need your tie rods to be (measurement from the rack to knuckle).

* For off road / track use only *