Phase 2 Motortrend
P2M - FT86 REAR UPPER CONTROL ARMS (P2-RUCA2086-HC)
P2M - FT86 REAR UPPER CONTROL ARMS (P2-RUCA2086-HC)
SKU:P2M-P2-RUCA2086-HC
Regular price
$545.00 USD
Regular price
Sale price
$545.00 USD
Quantity
Couldn't load pickup availability
Need help finding the right part?
Call us at
(239) 270-5116
Mon-Fri 10–5 EST | Sales & Support
Sat-Sun 10–5 EST | Sales
View full details
Mon-Fri 10–5 EST | Sales & Support
Sat-Sun 10–5 EST | Sales
OVERVIEW
P2M rear upper control arms for FT86 can be useful for extreme negative camber settings on the street. Combined with full adjustable rear suspension links precise adjust ability to your car's rear end suspension geometry can be achieved. Made from S45C steel tubing, 3pc teflon based rod end w/dust boot and a thick powder coated blue finish.
CAMBER ADJUSTMENT:
- By default can go up to -6 negative camber.
- The arm is setup for NEGATIVE CAMBER adjustment ONLY. Please DO NOT run stock camber (0 to -1 deg) with this arm as it can be overly extended.
- It is RECOMMENDED to run between -3 to -6 deg of camber with this arm for preferred setting.
- By removing the first jam nut (nut in front of the turnbuckle) will gain additional -2 deg (for approximate total -8 deg camber)
- By removing the last jam nut (nut in the BACK of the turnbuckle) will gain additional -3 deg (for approximate total -9 deg camber)
- By removing BOTH jam nuts will achieve approximate -10 to -11 deg of camber
** DISCLAIMER: FOR ANYONE REMOVING THE JAM NUTS TO ACHIEVE NEGATIVE CAMBER PLEASE MAKE SURE THE ARMS MUST BE LOCKED INTO THE SHORTEST POSITION. DO NOT EXTEND THE ARMS WITHOUT JAM NUTS IN PLACE.
CAMBER ADJUSTMENT:
- By default can go up to -6 negative camber.
- The arm is setup for NEGATIVE CAMBER adjustment ONLY. Please DO NOT run stock camber (0 to -1 deg) with this arm as it can be overly extended.
- It is RECOMMENDED to run between -3 to -6 deg of camber with this arm for preferred setting.
- By removing the first jam nut (nut in front of the turnbuckle) will gain additional -2 deg (for approximate total -8 deg camber)
- By removing the last jam nut (nut in the BACK of the turnbuckle) will gain additional -3 deg (for approximate total -9 deg camber)
- By removing BOTH jam nuts will achieve approximate -10 to -11 deg of camber
** DISCLAIMER: FOR ANYONE REMOVING THE JAM NUTS TO ACHIEVE NEGATIVE CAMBER PLEASE MAKE SURE THE ARMS MUST BE LOCKED INTO THE SHORTEST POSITION. DO NOT EXTEND THE ARMS WITHOUT JAM NUTS IN PLACE.
Recently Viewed
Check out our Universal Parts Picker and explore even more of your favorite products—all in one place.
Same Day Fulfilment On in Stock Items!
2PM EST cutoff*
RETURNS
30 days return policy
Check our store for latest items
New products updated daily!
Mon - Fri Customer service
10am - 5pm