Synergy Race Development - 05-14 Mustang Edge Handbrake Kit

Exactly what I wanted, the helpful staff at Scotidi and Drift HQ helped me get exactly what I wanted. The install was easy and the fitment was perfect. After some drifting with this I would highly recommend this setup as it works fantastically.

Overall everything works as intended with the exception of the hand brake mount. Handbrake, lines, caliper brackets are great. The handbrake mount, which secures the handbrake to body of the car, seems to have the measurements off for proper fitment. It’s so close to the shifter and with the hardware provided cause the hardware holding the handbrake to the mount to come in contact with the body and flexes the mount causing the handbrake to come even closer to the shifter. The handbrake mounting locations needs to be about 0.5-1 inch closer to the steering wheel to not interfere with the shifter or body of the car. The shifter interference happened both with a stock shifter and MGW short throw. I added some .25 inch spacers underneath the mounting bracket and opened up the holes about .25-.50 of an inch towards the driver side of the car to offset the mounting location of the handbrake and there is no longer interference with the shifter, however you still can’t rap your hand around the shifter in 1st/2nd gear. Will be ordering the FDF mounting bracket to see if the fitment is better.