SRS-Concept - E30 5 lug complete adapter kit-Front and Rear (1951)

FOR EVERY ONE THAT DOESN’T WANT TO SPEND ALL THEIR MONEY TO BUY NEW AND ULTRA RARE PARTS

FRONT END DESCRIPTION:

FIT ON BMW  E30 ( 318, 325, i, is, e, es ) and more ! ( please contact us if your E30 is from 84 or 85 ! You will need a custom set of hubs )

Do you want to do a 5 lugs conversion on your 4 lug e30 by using e36 5 lug but there you have a problem … With standard e36 knuckles and control arms your front wheels are not centred in the arch !! To center the wheel in the arch you have to buy offset control arm bushings and 2 new 1996+ e36 m3 control arms that will cost you up to 500$ if you can still find evo’s arms !!! This kit will let you use e36 non-M or M3 complete knuckle assemblies on your e30 control arms.

There is the only affordable solution !! 100% bolt on !!

Instruction:
-You can see a step by step installation process of this kit HERE.

Parts required for the Front End:
-Complete e36 front knuckles with brake calipers, rotor, hub assembly, wheel, and coilover.
-Stock e30 control arms or e36 non-m3 control arms ( they have the same geometry ). You can also use e46 control arms and grind down the hexagonal control arm bushing end to make it round.
-Use your stock e30 shock top plate and install them on the E36 struts or drill 2 holes on your shock towers to keep the e36 top plates.
-Bolt everything in place, connect all brake lines, bleed your brakes.
-Take a ride !
-This kit is made from steel for the housing, oiled brass for the bushing and then powder coated.

For every one that don’t want to spend all his money to buy new and ultra rare parts ( now discontinued by the dealer ! )

*Please ensure that you having exactly 20mm diameter at the end of the control that slides into the bushing, some aftermarket control arms may have thick paint that needs sanded off to properly fit into the control arm bushing, please sand the paint down prior installing this kit! The sleeves are designed for moving with the control arm to ensure proper wear protection. They can’t move properly if you force them on, so please sand the end of the control arm to be 20mm in diameter.
*If you have special control arms that are 20.2mm, contact us, we can make you a custom kit easily for free !

REAR END DESCRIPTION:

FIT ON BMW E30 ( 318, 325, i, is, e, es ) and more ! ( please contact us if your E30 is from 84 or 85 ! You will need a custom set of hubs )

Do you want bigger rear brakes ? Or just better BMW wheel options ? This kit will easily complete your 5 lug conversion on your E30. No need to find rare parts at the junkyard. We offer you the only safe conversion kit in the entire world ! This will upgrade the rotor size from the 258mm non-vented E30 rotors to 294mm vented rotors. The parking brake will also work ! No modification to the handbrake system needed !

Instruction:
-Remove the 4 lug hubs
-Press in the 5 lug hubs
-Install the adapter plates
-Bolt on your new rotors
-Bolt on your new calipers

*Some adjustment may be required – Professional installation is highly recommended.

Specifications:
-These plate are made with brand new laser cut steel.
-Each purchase are for 2 plates, 4 bolts and 2 5 lug hubs ( if you choose the with hubs option ).

Instruction:
-You can see a step by step installation process of this kit HERE.

Parts required for the Rear End:
-2 BMW hubs (BMW 33416752381) ( ***IF YOU CHOOSE THE ADAPTER ONLY OPTION*** )

-2 rotors from:
BMW    323I      2000
BMW    325CI   2001-2006
BMW    325I     2001-2005
BMW    328CI   2000
BMW    328I     1999-2000

-2 rear calipers from:
BMW    325CI    2001-2006
BMW    325I      2001-2005
BMW    325XI   2001-2005
BMW    328CI   2000
BMW    328I     1999-2000
BMW    Z4         2003-2008

-OEM part number list:
Caliper housing left         1x      34216758135
Caliper housing right      1x      34216758136
Caliper carrier                 2x      34216758134