Tick Performance - Blower Stage 1 V2 Camshaft for LS2 Engines

Tick Performance proudly offers our Elite Series of Camshafts designed specifically for LS2 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Our Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge!  Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.

Tick Performance Blower Stage 1 V2 Camshaft for LS2 Engines
225/237 | .62x"/.61x" | LSA116+5

Designed for:  LS2, LQ4 and LQ9 Engines (346-364ci) with Cathedral Port Heads (as they're equipped with stock)
Basic Operating RPM Range:  1800-6600
Expected Horsepower Gains:  50-70RWHP over the stock camshaft in a well-optimized setup
Expected Torque Gains:  25-40RWTQ over the stock camshaft in a well-optimized setup
Aftermarket Headers Required:  No (although longtube headers will allow maximum power gains)
Stall Converter Required:  Yes, 3200-3600RPM
Rear Gear Upgrade Required:  No, unless your car has an automatic transmission with a 2.73 gear (we suggest 3.23+ for automatics)
Works Well with Nitrous:  No, designed for supercharged applications
Will Pass Most Smog Emissions:  No

Our Tick Performance Blower Stage 1 V2 Camshaft is a fresh re-design, intended to provide a nice mid-and-high RPM range power increase and a quiet but slightly noticeable idle in Centrifugal OR Roots style supercharged applications!  This isn’t just a generic “boost” camshaft that we say “one size fits all” because frankly, one size does NOT fit all with boost!  We strongly suggest the use of our Tick/PAC Dual Valvesprings and hardened pushrods with this camshaft (sold separately.)  Hundreds of hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.

Option Guide: Do I need the 3-Bolt Conversion Kit?
In 2007, GM began installing a camshaft in select LSx engines that used one large bolt to attach the timing chain gear.  All Tick Performance Elite Series Camshafts use 3 bolts to attach the timing chain gear, as the earler LSx engines used.  If your engine is a 2007 or newer (or if you're not sure which camshaft style you've got), we suggest adding the 3-Bolt Conversion Kit during checkout.  This Conversion Kit includes everything that you'll need to convert your single-bolt setup over to the 3-Bolt setup (the proper timing chain gear and a set of 3 ARP camshaft bolts.)  If you'd prefer to retain the single bolt style camshaft (not recommended), please place your order with us via phone.

1x GM 12586481, 1x ARP 134-1003