04-12 Colorado/Canyon PTFE Braided Front Brake Line Kit

Looking to firm up your pedal and improve the durability and longevity of your braking system? We got the solution! These DOT rated brake lines not only do all of this, but also look great doing it. These lines use the factory clip to retain the line to the chassis and the factory banjo bolt. Are you running Crown Vic brakes with our Crown Vic knuckle swap control arms? No worries! These work with those too! These lines are extended length (21.5”), so they will work on both coil spring and torsion bar trucks.

Kit includes:

• 2x 04-12 Colorado Front DOT Rated -4AN Stainless Braided Brake Lines

Construction: extruded TeflonTM (.040" wall) tube with stainless steel single wire braid cover.

Opperating Temperature Range: -100 f to +450 f (-73 c to 232 c).

PTFE TeflonTM Hose Information
Conventional, rubber with textile reinforcement, brake hoses allow a significant amount of volumetric expansion- that is, they swell under pressure. This can lead to poor "pedal feel" which is unacceptable for competition applications. For these reasons, smooth bore PTFE (TeflonTM) hose with a stainless steel braided exterior is used for most high performance brake hose, and hydraulic, applications. Benefits to this type of hose are its low weight, high strength & temperature capability and resistance to road hazard damage. Common brand types are: Aeroquip "TFE Racing Hose" or 2807, "Moquip TFE", Aeroquip Aerospace "666", Speed-Flex "600" & "411". Hose can be used with either reusable, or permanent swage, type fittings. All fittings can be interchanged between brands with the exception of Aeroquip Aerospace. Popular applications for TFE hose are: hydraulic brake & clutch, fuel & oil pressure gauges, nitrous oxide, suspension shock, and fire system plumbing. Hose and fittings are available in AN -3, -4, -6, -8 sizes, with AN -3 and -4 being most popular.

****Feel free to call our sales line at 763-670-6941 to check stock****