ACHILLES MOTORSPORTS - UPGRADED OIL PUMP SHAFT KIT - BMW S54/S50B30/B32EURO ENGINE SWAP USING M52 PUMP CONVERSION

Our S54 Conversion shaft is designed to work on late model M52/S52US generation pumps shown below in the green box. This is a typical conversion when retrofitting an S54 engine into a chassis such as an E30 or E34 that requires the use of a front sump oil pan.

This kit can also be used to upgrade the Euro S50B30 3.0L Single Vanos engine oil pump to the later generation pump utilizes a higher volume pump.

After witnessing countless instances of the oil pump shaft shearing off or splines stripping and oil pump nuts falling off or coming loose, all of which result in instant loss of oil pressure, we decided to develop solution. Don't let your oil pump leave you stuck with costly engine repairs or even worse!

Now included at no additional charge is our EDM Drilled Grade 8 Bolt and piece of safety wire to lay your worries to rest for good!
The ULTIMATE SOLUTION for your S54 Swapped car offered only by Achilles Motorsports.

Key Features

• Hardened chromoly centerless ground shaft
• EDM Drilled Bolt with a piece of safety wire included
• Grade 8 extended length hardware to secure the gear to shaft
• Left hand threaded to prevent it from unexpectedly coming loose
• Exclusive square cut locking corner keyed shaft and matching drive gear
• 100% serviceable & rebuildable without the need for grinding of welds.