DomiWorks Engineering - NP231/241/242/243/246/249 TRANSFER CASE ADAPTER TO DODGE 8HP70/75 ECODIESEL RAM 1500

NP 231/241/242/243/246/249 Transfer Case Adapter to Dodge 8HP70/75

Adapter made out of high grade aluminum and anodized for a premium feel and experience. Anodizied black!

We have confirmed this works with:

• 8HP70/75 Dodge RAM EcoDiesel
• 8HP70/75 Dodge RAM 1500
• Jeep Grand Cherokee EcoDiesel
• Jeep Grand Cherokee Hemi 5.7 and 6.0

Note! We have seen that some of these transmission has a slightly longer output axle (Jeep Grand Cherokee EcoDiesel). The standard measurment should be 96mm from the rear plane to the tip of the axle. If this measurment is longer on your transmission you need a spacer plate. Contact us for information and availability.

Possible to adjust the transfer case tilt angle in 5 degrees increment, 360 full rotation. 

Integrated support bracket for easy integration of crossmember and cushions.

Total length of 115mm.

To be used with a transfer case gear that uses 23-spline. Preferably ZTNP22390 or similar.

Confirmed fitment to following transfer cases:

- NP231
- NP241
- NP242
- NP243
- NP246
- NP249

Note! Always check the input axle protrusion, we have found that for the NP242 it is about 5mm to long so the axle needs to be cut to not bottom out.

Note! The adapter will work with NP149 but the input shaft of the NP149 is not available in a 23-spline configuration. A solution for the NP149 is currently being developed.