GKTech - Z34 370Z VEHICLE SPECIFIC E-BRAKE

When installing a hydraulic e-brake in your car, you'd typically have to drill holes or weld a bracket in place. We understand that not everyone wants to do that, so we've made these bolt in brackets. 

The brackets bolt to the stock gearbox shifter hole and allows you to fit our hydraulic e-brake assembly without modifications to the gearbox tunnel.

- 100% direct fit with no modifications required to the gearbox tunnel
- Available for either center console or side mount LHD and RHD variants.
- Laser cut from 5mm thick 4130 Chromoly sheet and zinc coated for longevity
- Outside mount includes 4x replacement M6x20mm
- Inside mount includes 4x replacement M6x20mm as well as hardware to suit LOW e-brake mount 

Inside mount = mounts inside the center console itself, no modifications required to the trim when used on both the left and right-hand side.

Outside mount = mounts outside the center console itself, no modifications required to the trim when used on both the left and right-hand side.

NOTE Outside mount when used on the drivers side may have contact with the OEM seat when the seating position is close to the steering wheel, the OEM seat can still be used but can cause damage with prolonged use.