PHR Bosch 74mm Throttle Body Adapter Kit for 2JZ-GTE

This adapter Kit converts the factory throttle body on the 2JZ-GTE VVT-i engine to a Bosch 74mm DBW (drive by wire) throttle body It also adapts the Bosch throttle body to either a coupler style or dual seal clamp style inlet. 

The throttle body to manifold adapter is the interconnect between the throttle body and the factory 2JZ-GTE VVT-i intake manifold. This may be necessary when installing some aftermarket engine management units.

Warning: The Bosch DBW Throttle Body cannot be controlled by a factory ECU. You must have an aftermarket ECU in order to control it.

Construction

The PHR 74mm Bosch Drive By Wire Throttle Body Adapter is machined from 6061 Billet Aluminum, and anodized black for corrosion and oxidation protection. Not to mention it looks killer.

Larger Throttle Body

The larger body opening allows more air to flow into the engine. This increase in airflow can lead to higher horsepower and torque, especially at higher engine speeds. 

Additionally, the throttle response tends to be quicker which is very important in performance driving scenarios where quick acceleration changes are needed.

Perfect Length

The overall length of the kit with the coupler adapter is the exact same overall length as the factory throttle body so no adjustments to your intercooler piping should have to be made.

Power Potential

A larger throttle body can help achieve higher peak power outputs. It's a part of a broader strategy to enhance the overall performance of the engine.