SRS-Concept - E36/E46 Twin Calipers Adapter V2 ( weld-on ) (3019)

This is the last version of our famous twin calipers adapter kit. Now more compatibility possibility and easier to install! INSTRUCTIONS HERE

You want to use a twin calipers and you want to make it yourself for cheaper, this is for you! A set of 2 bracket for a perfect weld-on twin calipers setup. In drift you won’t deal with a in-line hydraulic setup who cant fail on hard braking.

This version is really light ! Only 0.42lbs on each side !

FIT ON BMW  E36 ( 318, 325, i, is, e and M3), E46 ( 316, 320, 325, 328, 330, i, is, ci, xi, d, ds and M3 )

-Weld it !
-Paint it !
-Bolt it !
-Take a ride !

-These bracket are made with 0,5inch ( 12mm ) mild steel. Cut just for you !
-Each purchase are for a complete kit of 2 bracket ( a pair of 2 bracket for each purchase ! )

-NEED TO BE WELDED OVER THE ABS SENSOR HOLE. ( this kit will need you to cancel your abs system )

PARTS NEEDED:

• You need to route an hard line from your handbrake. So it included that you need to source some brake line.
• Of course, you will need an other set of calipers. You will need the same model of calipers you actually have on your car. So if you have a 328i, you will need 328i calipers. That’s for adapt perfectly to your rotors because BMW have many different size of rotors for the same chassis model. In case you have a big brake, you will need to source the same kit to get the same height and the right inside clearance for the thickness of the rotors.
• And a good set of brake pads

*Note: Pictures of the installed products may differ than the real parts. They are from customers builds, not necessarily recent and accurate.