Ir directamente a la información del producto
1 de 17

Drift HQ

DRIFT HQ - Corvette C5 / C6 Wilwood Dual Caliper (Modelo de freno de mano estándar)

DRIFT HQ - Corvette C5 / C6 Wilwood Dual Caliper (Modelo de freno de mano estándar)

SKU: DHQ-VETTE-C5C6-DC-9

This sku has been copied to your clipboard!
Get the best deal with our price match guarantee.
Contact us today! (239) 270-5116 sales@drifthq.com

double entires
This purchase would enter you into the RTR Mustang Spec 5 with 208 entries. Learn more
Precio habitual $527.00 USD
Precio habitual $620.00 USD Precio de oferta $527.00 USD
Oferta Agotado

Kit de pinza doble atornillado recientemente desarrollado para el Corvette C5/C6 que retiene el freno de estacionamiento original.

El diseño atornillado no requiere ninguna modificación en el muñón de fábrica aparte de quitar el protector contra el polvo. El ajuste es muy ajustado debido a la colocación del freno de estacionamiento de fábrica.

*Tenga en cuenta que se recomienda dejar el soporte suelto durante la instalación antes de la instalación de las pinzas. Después de la instalación de las pinzas, vuelva a apretar los soportes.

  • Construcción de aluminio billet
  • Herrajes de grado 10,9/12,9 para las pinzas
  • El soporte retiene el conjunto del freno de estacionamiento original

El kit incluye:

  • 2x soportes (izquierdo y derecho)
  • 2x WILWOOD DYNAPRO modificado 120-9687
  • 1x Kit de almohadillas Polymatrix agresivas
  • 4 pernos de montaje del calibrador.
  • 4 pasadores de retención de la almohadilla
  • 4 pernos de soporte.

¡MIRA NUESTRO KIT DE LÍNEA READY TO GO!

Ver todos los detalles

Customer Reviews

Based on 6 reviews
83%
(5)
17%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Tyler Acton
Cant hold pressure for long term and goes through pads

I have had this setup for a whole season (around 30 days of drifting) I have not had good luck with it holding pressure. I have even gone as far as detaching the handbrake and putting it on the roof to make sure its the highest point when i bleed it. I have had to bleed it before every event and I would usually get a solid day of good pressure before i start noticing it go away and me having to pump it many times before it locks the brakes. I have made sure there are no leaks on the whole system. About half way through the season i did have to replace the pads and i got lucky enough that DriftHQ was at that event so i just walked over and bought some so i got lucky. It did not bother me so much to replace the pads because i do love how it feels when its working properly but i don't have the best luck with the setup especially with how much the upfront cost was. love drift hq for their products and R&D but not loving this setup as much.

J
Just Clutch It
Locks rear tires but can't retain factory working handbrake

Good kit for the simple bolt-on folks like myself that aren't too mechanically inclined. Be aware you have to remove the rear knuckle to remove dust shield which literally holds the brake shoes for the factory handbrake. You also can't get to the bottom caliper bolt with the rear tie rod in place which won't clear the caliper if installed prior, so you have to leave top bolt out fold caliper down, install tie rod, then fold caliper back in place to install top bolt and then you can't get to bottom bolt bc lower control arm is in the way. You could remedy this by unscrewing tie rod from rear arm but then you'll need an alignment. Personally I greatly appreciate these kits because I'm no fabricator but if I was I definitely wouldn't be proud of this work. Maybe someone will make one with the caliper mounts slightly higher, which would also aid in the bleeding process. Installed on c6 grand sport.

J
James Slocum
Excellent product

Install was quick and fairly easy. Love this set up. Had to use 90 degree fittings at caliper. Would highly recommend!!

C
Christopher Deshotel
C5 corvette dual caliper w/ stock handbrake

Shipping was incredibly fast install went great.

D
Derick Gaskins
Absolutely awesome kit

This kits so nice. I absolutely love the support the guys at drift hq delivery. The order was fulfilled very quickly. I am very pleased with my kit.

  • Cumplimiento el mismo día!

    Corte a las 12:00 p. m., hora del Este*

  • política de devolución de 30 días

    ¡Nuevos productos actualizados diariamente!

  • Lun - Vie Atención al cliente

    10 a. m. - 5 p. m.