E30 & E36 CONTROL ARM EYEBALL CENTERED ARMS - "TREEHOUSE" V2

Description

These are the V2 versions that have been redesigned to be significantly stronger than the original. These new V2 Treehouse control arm mounts are made from cold rolled 1018 carbon steel, so you will never have to buy another set of front control arm mounts again. We chose cold rolled 1018 steel for its high strength and excellent wear resistance, making it a perfect material for suspension parts that require durability and superior strength.

Why Treehouse?

Looking for a way to sharpen your E30/ E36's overall steering and chassis feel? Our Treehouse Style Centered Control Arm Mounts are produced out of cold rolled steel, which is CNC milled to tolerances well beyond factory control arm lollipop mounts. Our centered Treehouse style control arm mounts are not only a great performance upgrade but also a permanent solution to a common wear item on these cars. These are a direct replacement for OEM lollipops and bushings and are in the centered position so you can run the same geometry as stock. This setup is a step up from just upgrading to poly or Delrin replacement bushings. Their biggest advantage is the design which will hold the control arm steady under all cornering loads. There is no room for movement/play with this setup. This is one of the most solid setups you can achieve on your E30 without DTM style solid mounting A.K.A. welding your control arm mounts directly to the body. You will immediately feel tighter handling and an improved turn-in response.

The geometry of these eyeball mounts will eliminate the "shimmy" and wheel hop caused by stock bushings and turn your daily driver into a canyon crusher. These treehouse-style eyeball arms offer the greatest performance increases in handling and turn-in while still being 100% acceptable for street use! There will be a very slight increase in noise but is well worth the trade-off in stability. If noise is a concern we also carry poly control arm bushings that get pressed into your stock lollipop mounts. They cost less than these eyeball mounts and will have less noise.

Features

Excellent for both regular Street or full Track use. Unfortunately, not Spec-E30/E36 legal. These are very similar to the discontinued "Treehouse racing" eyeball control arm bushing mounts. As with all Garagistic products; we offer a lifetime guarantee. Price listed above is for a pair (2 units). Enough to do 1 car.

V2 Centered Control Arm Mount Features

• Production: Made in the USA
• Direct Replacement: OEM PN# 31129069035
• Material: Made of Cold Rolled 1018 Steel
• Finish: Powder Coated Red
• Servicability: Service slots on the back for greasing/insert replacement

Fitment

Direct Replacement: OEM part number 31129069035.

These bushings fit the following BMW's:

• 1984 - 1991 BMW 3 Series All Models
• 1992 - 1999 BMW 3 Series All Models
• 1995 - 2002 BMW Z3 Series All Models

NEED REPLACEMENT BUSHINGS? CLICK HERE