
OVERVIEW
When converting your FR-S / GR86 / BRZ to 5x114.3 (using our conversion hubs) you need to use these rotors unless you're running an OEM Brembo setup. The increase in hub size when going from 5x100 to 5x114.3 is enough to make the OEM rotors not fit.
We teamed up with the guys at HFM.Parts to develop this custom rotor.
Outside of just being a replacement rotor, the indentations on the rotor surface have a slight curvature to improve cleaning ability and ventilation, paired with a black coated center to complete the overall look and performance of the rotor.
NOTE: Can only be used to replace the OEM GTS 293x24mm rotors.
FAQS
If I'm using your conversion hubs and I have GT (277x24mm) rotors, can I use these?No, these rotors are 293mm in diameter. If you're currently running GT calipers, you will need to upgrade to the GTS or Brembo calipers in order to use our conversion hubs and as these rotors are 293mm in diameter these can only be used to replace 293mm rotors.
If I have the OEM Brembo upgrade brakes can I use these rotors?
No, these rotors are 293mm in diameter. If you are looking to run our conversion hubs and you have Brembos you will just need to re-drill your current rotors to the new PCD and you're good to go.
Do you also sell rotors for the rear?
No, there is no need for an aftermarket rotor for the rear when using our conversion hubs. As such, we haven't made a replacement rotor.
Is this listing for a single rotor or a pair?
This listing is for a pair of rotors. By purchasing 1 you will receive a pair.
VEHICLE COMPATIBILITY
SCION
FR-S ZN6SUBARU
BRZ ZC6BRZ ZD8
TOYOTA
GR86 ZN8GT86 ZN6
Recently Viewed
Check out our Universal Parts Picker and explore even more of your favorite products—all in one place.
Same Day Fulfilment On in Stock Items!
2PM EST cutoff*
RETURNS
30 days return policy
Check our store for latest items
New products updated daily!
Mon - Fri Customer service
10am - 5pm