Haltech Nexus Plug-in ECU - Mazda RX-8 HT-231401

Suits: Mazda RX-8 Series 1 2003-2008, 13B-MSP Renesis 6-port (ADM, USDM, JDM, EUDM) Mazda RX-8 Series 1 2003-2008, 13B 4-port (JDM)

Includes: Nexus Plug-in ECU, Air temperature + Wideband expansion harness 2.5m (8') and spare pins, Air temperature sensor (1/8' NPT), Mounting hardware, vacuum hose, T-piece, USB cable, Quick Start Guide

Notes: Supports Manual Transmissions Only - Factory manual - 5 speed on 4-port, 6 speed on 6-port

• Nexus Plug-in Mazda RX-8 ECU
• Air temperature + Wideband expansion harness 2.5m (8')
• Air temperature sensor (1/8' NPT)
• Aluminium bung for air temperature sensor
• Mounting brackets and hardware to suit
• 3mm Vacuum hose 2.5m (8')
• 3mm Aluminium Vacuum T piece
• Haltech USB-C cable
• Quick start guide 
  
  
  NEXUS PLUG-IN ECU FEATURES
  • Drive By Wire Throttle Support
  • Single Channel Onboard Wideband Control - Supports LSU4.9/NTK
  • Wi-Fi
  • 4 channel onboard oscilloscope
  • Data logging 128MB
  • Flex Fuel
  • Closed Loop O2 Control
  • Knock Control
  • Long term learning
  AUXILIARY CONNECTOR
  • 4 X Digital Pulsed Outputs
  • 4 X Synchronised Pulsed Inputs
  • 1 X Onboard Wideband
  • 2 X Sensor Ground
  • 2 x 12V Output
  • 2 x 5V Output
  SUPPORTED OEM FUNCTIONALITY:
  • Drive-By-Wire / Electronic throttle
  • Alternator control
  • Cruise control switch
  • Oil Metering Pump (OMP)
  • Secondary Shutter Valve (SSV) solenoid
  • Variable Dynamic Intake (VDI) solenoid
  • Variable Fresh Air Duct (VFAD) solenoid
  • Auxiliary Port Valves (APV) motor
  • Electronic Power Steering
  • DSC / Traction control
  • Instrument cluster
  • Rear O2 sensor (used as narrowband)
  • ABS module (Note: Limited support. Currently we support the AUDM, JDM, USDM, and two different European versions of the ABS module. Other modules will have different CAN addressing.) ABS modules using K-line (instead of CAN) is not supported.
  • Immobiliser light on dash (Note: We don't support the immobiliser, but the Haltech Plug-in ECU will still function and run the car regardless of the factory immobiliser and can prevent the immobiliser warning light from turning ON when the factory ECU is replaced.)