The Wisefab angle kit for Tesla Model 3 is engineered from the ground up to combine innovation, strength, and performance for electric vehicle drifting. Unlike simple modifications, this is a complete bolt-on solution that ensures your Tesla maintains its factory-like look while gaining the aggressive steering angle, stability, and adjustability required for serious drifting. Whether you are drifting for fun or aiming to participate at grassroots competitions, the kit guarantees confidence, precision, and control in every corner.
A standout feature of this kit is the steering rack conversion that allows to install the BMW E9X/E8X electric steering rack (not included). By replacing the OEM Tesla rack with a BMW E9X/E8X unit, you gain a steering system that is stronger, more precise, and provides superior self-steer characteristics — essential for smooth, predictable drift transitions. This upgrade ensures that the steering feel matches the performance potential of the suspension setup.
Please note: this kit is designed for motorsport use only and is not street legal.
- 55+ degrees of steering angle
-
Adjustable Ackermann
Tune your steering geometry towards either positive or negative Ackermann in just a few minutes, even trackside, without messing up an alignment.
- Adjustable lock stops
-
High strength drift-specific knuckles
Upgraded kinematics and durability
-
One-piece lower control arm design with quick caster adjustment
Lower control arm has built-in, easy to use quick caster adjuster.
-
Precise camber control and minimal bump-steer with high steering angles
With our kinematics we have engineered the camber to provide very good front grip and the bump-steer to be minimal throughout the range of steering.
-
Consistent and predictable self-alignment torque
With our setup the steering wheel moves towards the direction of wheel movement and will not stuck at full lock.
Kit includes:
- Knuckles with hardware
- Lower control arms
- Upper control arms
- Assembled tie rods
- BMW Electric steering rack conversion kit (rack is not included)
- Wisefab EPS module with wiring
- Installation guide
Other components, packaging and clearance.
- This kit assumes coilovers for clearance and height adjustment.
- Depending on wheel width and ET, wider fenders or fender flares may be needed.
- Minimum wheel diameter is 18”
