Garagistic BMW Clutch Stop - E30, E36, Z3

Overview

Introducing a clutch stop that is actually designed for your BMW, not one that is thrown together with generic hardware! By simply replacing your stock clutch stop with this massive 61mm diameter clutch stop, you can adjust the amount of free play in the pedal travel with the 45mm stud. By adjusting this clutch pedal stop up off of the floor you no longer push the pedal further than you need to, allowing for quicker shifts. This is the ultimate clutch stop for your manual transmission BMW. Obviously, not applicable to vehicles equipped with automatic or have SMG transmissions.

Fitment Note: The E30/E36 version comes with a 45mm bolt. The E46 version uses a 35mm bolt! Make sure to choose the correct version for your chassis. To purchase the E46 version, click here!

Why install a clutch stop?

A clutch stop will provide faster and smoother shifts by reducing and/or eliminating the dead space between your clutch pedal and the floor. This is a must for spirited drivers and track junkies. Installation Difficulty is incredibly SIMPLE. No Tools at all. Anyone can install this clutch stop within a minute or two! Fully adjustable to your personal driving preference.

We recommend always using a little blue Loctite to make sure the bolts don't get loose! This is the version we recommend: https://amzn.to/3MWIUlO

Compatibility

• E30
• E34
• E36
• Does not fit RHD E30s.

If you are not satisfied with your purchase, send it back for a money-back guarantee. Not to mention there is a LIFETIME warranty. The E46 330 and E39 5 series version uses a shortened thread. A few other BMWs may require slight modification. It does not fit RHD E30s. We stand by our products, which come with a lifetime warranty.

Benefits

What are the benefits of a clutch stop?

• Adds responsiveness
• Streetcar approved
• Faster and smoother shifts
• Lifetime warranty
• Easy install
• 61mm diameter
• Compatible with E30, E36, E28, E21, E34

Installation Notes

Step 1: Remove the factory clutch stop from the threaded provision behind the clutch pedal close to the firewall.

Step 2: Screw in your clutch stop and adjust it to your preferred setting before tightening the jam nut

Step 3: Enjoy crisp and consistent shifts!

We recommend always using a little blue Loctite to make sure the bolts don't get loose! This is the version we recommend: https://amzn.to/3MWIUlO