REAR TIE DOWN ADAPTERS FOR YOUR E30-E46!

If you tow your car to the track , you need a good way to hold down your E30, E36 or E46 BMW. The lower control arms under the 3 series are not ideal. You may have nice wheels on your car and in the case of an emergency, the tow guys might run a strap right on the lip of your rim, potentially ruining the finish. We have a solution to tie down your E30, E36, or E46. These rear shock tie down adapters make it a snap to locate and secure your vehicle when being transported. Sold in pairs (left and right). Comes powedercoated red. No need for install and removal, stays on the car and does not alter performance. This rear BMW tie down strap hook is great as a supplement tie down point as well.

Price is for a pair (2 units). Enough to do 1 car.

WHAT BMW CARS WILL THE REAR SHOCK TIE DOWNS WORK ON?

• E30
• E36
• E46
• Z3, Z4

Instructions:

garagistic Rear Shock Tie Down

Step1: Safely and securely put the rear of the vehicle on jack stands.

Step2: Support the trailing with you jack so it wont fall when you remove the bottom shock bolt

Step3: Remove the lower shock bolt and lower the trailing arm slowly.

Step 4: With the bigger side of the tie down facing the rear line up the small hole with the bottom of the shock and put the bolt through

Step5: You can muscle up the shock or jack up the shock to line up the bolt with the trailing arm and start threading it. Torque 57ft-lbs.

Disclaimer

This instructional guide is intended to provide general information only. We recommend a professional automotive technician install any of our products. In no event shall Garagistic be liable for any special, direct, indirect, consequential, incidental injuries or damages whatsoever.