Mishimoto 2024+ Toyota Tacoma Recovery Points - Front - Black

When a recovery situation hits on a remote trail, the weakest point in the system determines the outcome. The Mishimoto Front Recovery Points for the 2024+ Toyota Tacoma are built to not be that point - forged alloy steel construction rated at 17,000 lbs working load limit each, engineered for the full spectrum of modern recovery loads from static pulls to kinetic rope extractions.----Forged alloy steel aligns the grain structure of the metal, delivering tensile strength that resists bending and cracking under dynamic recovery forces where cast or stamped recovery points give way. Recessed bolt heads sit flush with the recovery point surface, eliminating the hardware exposure that causes bolt-head shear when the front end contacts a rock or obstacle. Electrogalvanizing seals the steel before powder coat is applied, blocking moisture and salt at the base metal for long-term corrosion resistance. Black dacromet hardware carries the same corrosion protection through every fastener, preventing rust migration and seizing at the mounting interface.----The opening geometry accepts both d-ring and soft shackles without modification, supporting either steel or synthetic rigging hardware. Available in powder coat black or red. Direct fit for the 2024+ Toyota Tacoma with no drilling, cutting, or modification required.----For complete front and rear recovery capability, pair with the Mishimoto Rear Recovery Points (MMTH-TAC-24-R), rated at 18,500 lbs WLL each and built with the same forged alloy steel construction for the rear bumper mounting location. Backed by the Mishimoto Lifetime Warranty.

This Part Fits:

Year	Make	Model	Submodel
2024-2026	Toyota	Tacoma	Limited
2024-2026	Toyota	Tacoma	SR
2024-2026	Toyota	Tacoma	SR5
2024-2026	Toyota	Tacoma	Trailhunter
2024-2026	Toyota	Tacoma	TRD Off-Road
2024-2026	Toyota	Tacoma	TRD PreRunner
2024-2026	Toyota	Tacoma	TRD Pro
2024-2026	Toyota	Tacoma	TRD Sport